Laser Marking Machine Marking Range

1.CO2 laser marking machine: mainly used for non-metal (wood, acrylic, paper, leather, etc.), cheap.
2.Green laser marking machine, ultraviolet laser marking machine: mainly used for high-end ultra-fine IC and other products. The price is relatively high, and the products are mainly customized.
3.Lamp pump YAG laser marking machine: mainly used for low-requirement products such as metal and plastic, and the laser marking machine is moderately priced.
4.Semiconductor side pump laser marking machine: the same as the lamp pump YAG laser marking machine, but more stable, moderate price.
5.Semiconductor end pump laser marking machine: the same as the lamp pump YAG laser marking machine, stable and power-saving, but used for high-end products, the price is relatively high.
6.Fiber laser marking machine: fine marking, power saving, maintenance-free, used for high-end products such as mobile phones and buttons. High price.
Semiconductor type
The light source uses a semiconductor array, so the light conversion efficiency is very high, reaching more than 40%; the heat loss is low, no separate cooling system is required; the power consumption is low, about 1800W/H. The performance of the whole machine is very stable, and it is a maintenance-free product. The maintenance-free time of the whole machine can reach 150,000 hours, which is equivalent to 10 years of maintenance-free, without the replacement of krypton lamps and consumables.
Basic configuration and technical specifications:
Model item CCC-DP50
Laser CCC-DP50 (coherent laser module)
Scanning mirror YAG-16mm lens
Focusing lens 1064-110
Q switch Gooch & Housego, UK
Control software Professional laser marking software for Windows98/2000/XP
Cooling system Water cooling
Working mode Static marking Font More than 50 standard fonts, and specially designed handwriting font input function
Input power 220V AC 50Hz
Laser output power 0-50W
Marking frequency 0.5-50KHZ
Total power 1500W
Marking line width 0.02mm
Marking depth ≤3mm (adjustable depending on the material) Marking speed ≤7000㎜/s
Minimum character 0.2mm
Marking range Standard: 110mm×110mm Note Precision three-dimensional lifting operation table [1]
CO2 type
Functional features:
1. Adopts CO2 gas laser tube, beam expansion and focusing optical system and high-speed galvanometer scanner, with stable performance, long life and maintenance-free
2. Can be widely used in electronic components, electrical parts, medicine, food, handicrafts, leather products, plastic products and other industries
3. The machine can be used alone or installed on the assembly line for joint use
4. The printing effect and marking speed can meet the requirements of modern large-scale production with high efficiency, high speed and high reliability
(1) The professional marking control software of the machine is a software system based on vector graphics marking, which supports background software such as Autocad and Photoshop. The system is powerful and easy to master
(2) Marking trademarks and models on transistors, chip components, ICs, ceramic capacitors, thermistors, etc. The characters are clear and beautiful and will not wear out;
Application range of CO2 laser marking machine:
The machine is widely used and can engrave most non-metallic materials: paper, leather, wood, plastic, plexiglass, cloth, acrylic, wood and bamboo, rubber, crystal, jade, ceramics, glass and artificial stone, etc.
Technical parameters:
Laser wavelength: 10.64μm
Laser repetition frequency: 5-20kHz
Standard engraving range: 110mm×110mm
Engraving depth: ≤5mm
Engraving line speed: ≤7000mm/s
Minimum line width: 0.1mm Minimum character: 0.4mm
Repeat accuracy: ±0.001mm
Machine power: 250W
Laser power: 10W, 30W, 50W, 100W